Fr 26. Sep 2008, 08:45
kuhler hat geschrieben:So gesehen macht das schon Sinn, wenn man sagt es liegt an den Treibern .
Interessant ist aber auch manchmal sehr selten wird sie auch im laufenden System erkannt.
Fr 26. Sep 2008, 08:45
Fr 26. Sep 2008, 09:22
franco_bez hat geschrieben:Nur wenn eine Karte beim booten steckte.
Dann kann man auch beliebig oft wechseln.
Fr 26. Sep 2008, 09:36
Fr 26. Sep 2008, 10:28
Fr 26. Sep 2008, 17:30
kuhler hat geschrieben:Hat leider nichts gebracht allerdings bin ich auch Linux Neuling von daher weiß ich nicht ob ich alles richtig gemacht habe. Dann warte ich halt mal auf Besserung
#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.
# franco: maybe this helps with the CardReaders ?
# modprobe jmb38x_ms
# modprobe mspro_block
# modprobe flash_bd
# modprobe xd_card
# modprobe jmb38x_xd
modprobe acpi-cpufreq
modprobe speedstep-lib
modprobe cpufreq_ondemand
modprobe cpufreq_stats
modprobe cpufreq_powersave
modprobe cpufreq_userspace
modprobe cpufreq_conservative
modprobe pciehp pciehp_force=1
modprobe sdhci
setpci -d 197b:2381 AE=47
# /usr/local/sbin/jmb38x_d3e.sh > /dev/null 2>&1 &
# franco: enables the W-LAN LED
sysctl -w dev.wifi0.ledpin=3
sysctl -w dev.wifi0.softled=1
# franco: enables the W-LAN Switch
/usr/bin/setkeycodes e055 159
/usr/bin/setkeycodes e056 158
# franco: other keycodes from linpus
#/usr/bin/setkeycodes e025 130
#/usr/bin/setkeycodes e026 131
#/usr/bin/setkeycodes e027 132
#/usr/bin/setkeycodes e029 133
#/usr/bin/setkeycodes e071 134
#/usr/bin/setkeycodes e072 135
#/usr/bin/setkeycodes e055 159
#/usr/bin/setkeycodes e056 158
# Economize the SSD
## sysctl -w vm.swappiness=1 # Strongly discourage swapping
## sysctl -w vm.vfs_cache_pressure=50 # Don't shrink the inode cache aggressively
# As in the rc.last.ctrl of Linpus
echo ondemand > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
echo ondemand > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor
cat /sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_rate_max > /sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_rate
echo 3000 > /proc/sys/vm/dirty_writeback_centisecs
echo 20 > /proc/sys/vm/dirty_ratio
echo 10 > /proc/sys/vm/dirty_background_ratio
echo 1 > /sys/devices/system/cpu/sched_smt_power_savings
echo 10 > /sys/module/snd_hda_intel/parameters/power_save
echo 5 > /proc/sys/vm/laptop_mode
#Decrease power usage of USB while idle
[ -L /sys/bus/usb/devices/1-5/power/level ] && echo auto > /sys/bus/usb/devices/1-5/power/level
[ -L /sys/bus/usb/devices/5-5/power/level ] && echo auto > /sys/bus/usb/devices/5-5/power/level
exit 0
Fr 10. Okt 2008, 10:19
Sa 18. Okt 2008, 17:39
# FRANCO
# GET THE RIGHT HAND SIDE CARDREADER WORKING ON ACER ASPIRE ONE
# STILL NEEDS ONE CARD INSERT EVENT TO INITIALIZE
# SO PLUG CARD, REMOVE IT AGAIN, REPLUG CARD - VOILA
SUBSYSTEM=="pci", ATTR{vendor}=="0x197b", ATTR{device}=="0x2381", \
RUN+="/usr/bin/setpci -d 197b:2381 AE=47"
Sa 18. Okt 2008, 20:55
# do not edit this file, it will be overwritten on update
ACTION!="add", GOTO="drivers_end"
DRIVER!="?*", ENV{MODALIAS}=="?*", RUN{ignore_error}+="/sbin/modprobe $env{MODALIAS}"
SUBSYSTEM=="pnp", DRIVER!="?*", ENV{MODALIAS}!="?*", \
RUN{ignore_error}+="/bin/sh -c '/sbin/modprobe -a $$(while read id; do echo pnp:d$$id; done < /sys$devpath/id)'"
SUBSYSTEM=="tifm", RUN+="/sbin/modprobe --all tifm_sd tifm_ms"
SUBSYSTEM=="memstick", RUN+="/sbin/modprobe --all ms_block mspro_block"
SUBSYSTEM=="mmc", RUN+="/sbin/modprobe mmc_block"
SUBSYSTEM=="i2o", RUN+="/sbin/modprobe i2o_block"
SUBSYSTEM=="ide", ATTR{media}=="tape", RUN+="/sbin/modprobe ide-scsi"
SUBSYSTEM=="scsi_device", TEST!="[module/sg]", RUN+="/sbin/modprobe sg"
LABEL="drivers_end"
Do 23. Okt 2008, 20:28
Fr 24. Okt 2008, 11:04
fly hat geschrieben:Bei mir läuft der Kartenleser noch nicht. Habe es bislang mit ner SD-Card und XD-Picture Card ausprobiert. Allerdings habe ich auch nur deinen letzten Fix ausprobiert. Die Datei 80-drivers.rules war bei meinem Ubuntu noch gar nicht vorhanden. Ist das so richtig?
1. Die Datei /etc/udev/rules.d/80-drivers.rules von linpus in das selbe Verzeichnis von Ubuntu kopieren.
Bei iphpbb3.com bekommen Sie ein kostenloses Forum mit vielen tollen Extras
Forum kostenlos einrichten - Hot Topics - Tags
Beliebteste Themen: Linux, USA, Programm, NES, Erde
Impressum | Datenschutz